Electric Motor Warehouse
 

Double Groove Bushing Type Pulley
AK Sheaves
Typically 1/2" Wide V Belt

Sheaves are precision machined from gray cast iron, statically balanced and epoxy powder coated.

Comparable Pulleys to Browning, Maska, Woods, Congress and many other brands

The "PD" Pitch Diameter indicates the outer diameter where the belt rides in the groove.
Example: "A" belt size will sit lower in the groove, leading to a smaller diameter than the real outer diameter.

PLEASE USE THE LIST BELOW TO HELP SELECT THE PULLEY SIZE YOU REQUIRE
CLICK ON THE CATALOG NUMBER TO BE DIRECTED TO THE BUY PAGE
"A/B" Section
 Use with A or 3L - 4L V-Belts

Taper Lock Bushing Required
 Select Bushing Below

***To determine the appropriate bushing, refer to the final letter in the part number of the sheave.***
 

Catalog page with dimensions

V-Belt Size Definition for Pulleys

Back to Pulley/Sheave Menu
Part #

Outside Diameter
2AK30H 3.05"
2AK32H 3.25"
2AK34H 3.45"
2AK39H 3.75"
2AK41H 3.95"
2AK44H 4.25"
2AK46H 4.45"
2AK49H 4.75"
2AK51H 4.95"
2AK54H 5.25"
2AK56H 5.45"
2AK59H 5.75"
2AK61H 5.95"
2AK64H 6.25"
2AK74H 7.25"
2AK84H 8.25"
2AK94H 9.25"
2AK104H 10.25"
2AK114H 11.25"
2AK124H 12.25"
2AK134H 13.25"
2AK144H 14.25"
2AK154H 15.25"
2AK184H 18.25"

QTL Bushings for above pulleys Only

 Bushing for Pulley
SAE Hubs
Part #

Bore Size
HX3/8 3/8"
HX1/2 1/2"
HX7/16 7/16"
HX9/16 9/16"
HX5/8 5/8"
HX11/16 11/16"
HX3/4 3/4"
HX13/16 13/16"
HX15/16 15/16"
HX7/8 7/8"
HX1 1"
HX1-1/16 1 1/16"
HX1-1/8 1 1/8"
HX1-3/16 1 3/16"
HX1-1/4 1 1/4"
HX1-3/8 1 3/8"
HX1-5/16 1 5/16"
HX1-7/16 1 7/16"
HX1-1/2 1 1/2"
H Metric Hubs
Part #

Bore Size
HX14MM 14MM
HX15MM 15MM
HX16MM 16MM
HX17MM 17MM
HX18MM 18MM
HX19MM 19MM
HX20MM 20MM
HX22MM 22MM
HX24MM 24MM
HX25MM 25MM
HX28MM 28MM
HX30MM 30MM
HX32MM 32MM
HX35MM 35MM
HX36MM 36MM
HX38MM 38MM