- 1HP, SF 1.65
- Total Horsepower 1.65 HP 3450 RPM, 15.4/7.7 amps, 115/230V 60hz
- Standard Efficiency
- Automatic Overload Protection
- Non-Reversible - CCW Rotation facing the shaft
- Open Drip Proof - Ball Bearings
- 56Y Frame-Square Flange; 5/8" diameter threaded stainless steel shaft
Optimized internal airflow design minimizes heat and moisture.
Internal bearing cover protects the drive/pump end ball bearing from water and debris that may occur inside of the motor.
Three additional layers of drive/pump end bearing protection:
Double Sealed Ball Bearing
Lip Seal
Water Slinger
56Y Square Flange replacement pool motor. Motor is found on many in ground pool pumps such as PacFab Challenger, Whisperflo, Pentair. Motor has a square type flange for mounting the pump. 4 non-threaded bolts holes in flange. 1 year manufacture warranty.
Replaces Century B848, B854, B2848, B2854, SQ1102, USQ1152, US MOTOR EB848, EB854
Model: K063DFN5152023J
Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect.
Please check your local and State codes to comply with their requirements for replacement pump motors.
Click here to help answer more questions
ATTENTION: Shipping Restrictions Apply!
California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: New York State Energy Research and Development Authority (NYSERDA) Section 509.23 has adopted the same standards as the State of California Title 20 laws. This pump/motor fails to meet these new regulations. Consequently, shipping this pump/motor to New York is illegal and violates state law. Should an order for this item be placed with a New York shipping address, we will be forced to cancel the order.
Familiarize yourself with the laws and building codes in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor.
We recommend using Century EVQ165 1.65THP Variable Speed Motor
