- 2 to 2.6 HP 3450 RPM, 11.5 amps, 230V 60hz. Switchless single phase
- NEMA 56Y frame (no base), 5/8" diameter threaded stainless steel shaft
- Overload Protection: Auto. Class B insulation, 6.5" body dia.
- Non-Reversible - CCW Rotation facing the shaft
- Square Flange Mount (1081 design), Ball Bearings, Open Drip Proof (ODP)
Optimized internal airflow design minimizes heat and moisture.
Internal bearing cover protects the drive/pump end ball bearing from water and debris that may occur inside of the motor.
Three additional layers of drive/pump end bearing protection:
Double Sealed Ball Bearing
Lip Seal
Water Slinger
56Y Square Flange replacement pool motor. Motor is found on many in ground pool pumps such as PacFab Challenger, Whisperflo, Pentair. Motor has a square type flange for mounting the pump. 4 non-threaded bolts holes in flange. 1 year manufacture warranty.
Model: K063DFR5154023J
Replaces Century B840, B2840
Replaces US Motor EB840
Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect.
Please check your local and State codes to comply with their requirements for replacement pump motors.
Click here to help answer more questions
ATTENTION: Shipping Restrictions Apply!
California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
New York: New York State Energy Research and Development Authority (NYSERDA) Section 509.23 has adopted the same standards as the State of California Title 20 laws. This pump/motor fails to meet these new regulations. Consequently, shipping this pump/motor to New York is illegal and violates state law. Should an order for this item be placed with a New York shipping address, we will be forced to cancel the order.
Familiarize yourself with the laws and building codes in your state and local area in regards to replacing pump motors, in order to adhere to their regulations.
