- 230/460 Volts 50/60 hz.
- 3 foot pounds
- 0.9 inrush amps/0.08 Holding Amps
- 56, 143T, 143TC, 145, 145TC 5/8" or 7/8" shaft dia.
- RPM Range 1200 to 3600
- IP23 Enclosure
Kit easily installs on back (Rear) of US Electric Unimount motors to convert to brake-motor use. Kit size is determined by NEMA frame and ft.-lb. of static torque required for the application. Includes mounting hardware.
Note: A start/stop cycle of no more than 1 stop per minute is acceptable for these brakes when used with a motor and reducer.
1-056-311-06-003; Dayton 23J946
Lead time to ship = 2 to 3 days