AFFINITY®, PREMIUM ENERGY EFFICIENT, TWO SPEED, 56J SWIMMING POOL MOTOR
WITH BUILT IN TIMER
Program for Low & High Speeds
Two Settings - Mon-Fri & Sat/Sun
Freeze Sensor
- 1.65 (THP) Total Horsepower
- 3450/1725 RPM, High/Low Speed
- 7.4/1.3 amps, 230V 60hz. Single Phase
- NEMA 56J frame (no base), 5/8" diameter threaded stainless steel shaft
- Overload Protection: Auto. Class B insulation, 6.5" body dia.
- Non-Reversible - CCW Rotation facing the shaft
- C-Face Mount, Ball Bearings, Open Drip Proof (ODP)
Does Not come with power cord
AQUA-SHEILD PERFORMANCE
Internal bearing cover protects the drive/pump end ball bearing from water and debris that may occur inside of the motor.
Optimized internal airflow design minimizes heat and moisture.
Three additional layers of drive/pump end bearing protection:
Double Sealed Ball Bearing
Lip Seal
Water Slinger
Premium efficiency motor, the first motor with an integrated timer, addresses the challenge many pool owners have when selecting the right time to run their pump at the energy-saving low speed to save the most in energy cost. No need for an expensive remote timer. Simple to operate, push button with display.
Replaces Century B2975T
Replaces Model EB2975T, B063AAU1017013J
Model B063ACD1047023J
Effective July 19, 2021 the US Dept of Energy regulations on single speed, two-speed and booster pumps go into effect.
Please check your local and State codes to comply with their requirements for replacement pump motors.
Click here to help answer more questions
ATTENTION: Shipping Restrictions Apply!
California: This replacement pump motor does not comply with California's Efficiency Regulations. These regulations can be found in Title 20, in the California Code of Regulations (CCR) sections 1601-1609. To meet California’s requirement, the replacement pump motor must be a variable speed.
To comply with current and upcoming regulations we recommend upgrading now to a variable speed motor.
We recommend using Century EVC165 1.65THP Variable Speed Motor
